Type: | Power Source Arrester |
---|---|
Structure: | Zinc Oxide Arrester |
Installation: | Parallel Arrester |
Application: | AC/DC System |
Size: | Small |
Operation Voltage: | Low Voltage |
Samples: |
---|
Customization: |
---|
Suppliers with verified business licenses
This AC surge protective device is applied low voltage standard IEC/EN 61643-11 to protect against AC power line system and other equipment from over voltage and instantaneous over voltage damage. It has advantages of large discharge current, fast respond time and low residual voltage.
Model | LY1-C40 |
Test standard | IEC/EN 61643-11;GB18802.11 |
SPD type | T1+T2/Class I+ II |
Maximum continuous operating voltage Uc | 275V AC |
Nominal discharge current (8/20µs) | 20kA |
Max. discharge current(8/20µs) | 40kA |
Iimp current(10/350µs) | 5kA |
Voltage protection level Up | 1.5kV |
Response time Ta | 25ns |
Poles | 1P, 2P, 3P ,4P ,1P+N-PE, 3P+N-PE |
Matched fuse or circuit breaker | 32A |
Connection wire specification | 4mm2(L/N); 6mm2(PE) |
Mounting | 35mm Din Rail |
Type of remote signaling contact (Optional) |
C+NC: Normally closed C+NO: Normally open C: Common contact |
Max. Voltage/Current for remote signaling | 1A/2A/3A 125V AC |
Wiring for remote signaling | 1.5mm2 max. |
Operating temperature | -40°C to +80°C |
Shell material | UL94-V0 fireproof material |
Certificates | TUV CB CE RoHS ISO9001:2015 |
1. Who are we?
Suppliers with verified business licenses