2p 12V DC SPD Solar PV Surge Protection Lightning Surge Arrester

• Customization: Available
• Type: DC Surge Protector
• Structure: Zinc Oxide Arrester
• Model NO.: LY1-C40 12V DC 2P
• Installation: DIN Rail
• Application: Lighting Protection
• Size: Small
• Operation Voltage: Low Voltage
• Shape: Cuboid
• Material: PBT
• Certification: ROHS, ISO9001
• Brand: Leeyee
• Poles: 2p
• in: 20ka
• Product Name: SPD DC
• Voltage: 12V DC
• Color: White
• Imax: 40ka
• Shipping Ways: Delivery Time 3-5days
• Certificate: CE
• Transport Package: 80PCS/Carton
• Trademark: LEEYEE
• Origin: Zhejiang, China
• HS Code: 8536300000
• Production Capacity: 1000 Piece/Week

Product Description

Product Description

Specification

Application:
This DC spd surge protective device is widely used in induction thunder and inlunce of direct lightning or other transient overvoltages
protection, to protect DC power system, photovoltaic system and other industrial DC power equipment safte to use.

Features:
1. Nice outlooking, module design, plugable eype, easy to replace.
2. Has over-heat protection function to avoid of fire happening.
3. Working status indicate, green means normal, red means fault.
4. Response time less than 25ns, large discharge capacity, low residual voltage.
5. No need power off can change module.
6. Standard 35mm Din rail installation.

 

 

Installation 1.Do power off when connect surge protection device to system. 2.Ground wire should be as short, straight and thick as possible to reduce the influence of distributed inductance on lightning discharge. 3.No need special maintenance. When surge protector happens fault,equipment connected to remote signal will send alarm, then power off and change new surge protector module is fine.

 

 

Remark: Customers can connect signal light or buzzer with this remote signal, when signal light on or buzzer sounds, then power off, change fault SPD module to new one is fine.

Model	LY1-C40
Maximum Continuous Operating Voltage Uc	15V DC
Nominal Discharge Current (8/20µs)	20kA
Maximum Discharge Current(8/20µs)	40kA
Poles	2P
Voltage Protection Level Up	≤3.6kV
Response Time tA	≤25ns
Indication Method	Visible window,Green=normal, Red=fault
Min. sectional area of incoming wire L/N	4mm2
Min. sectional area of incoming ground wire PE	6mm2
Method of Installation	35mm Din Rail
Shell material	PBT
Shell protection degree	IP20
Working temperature	-25 -+70

Packing & Delivery